The DERC Pre-filter filters your suction water and protects your valuable high pressure equipment. A filtration of 800 to 30 microns is possible by the use of two various filter elements. The stainless steel filter elements are easy to clean.
The Pre-filter standard comes with one outer filter element. The individual filter element comes with a stainless steel filter mesh. A wide range of filter elements makes a filtration of 800 to 30 microns possible. The water is filtered from the outside to the inside. The Pre-filter is equipped with a flush valve to clean your Pre-filter during operation.
Safety, ergonomics, simplicity and adding value to you business are the key drivers for our engineering department. This stainless steel DERC Pre-filter is easy to handle and operate. It is light weight and linkable.
Filtration
The DERC Pre-filter filters your suction water. A filtration of 800 to 30 microns is possible by using two various filter elements.
The stainless steel filter elements are easy to clean.
Linkable
Connect DERC Pre-filters to realise optimal filtration capacity. You can easily link a second or third Pre-filter, doubling or tripling your filter capacity. Just hook on to the clips on the frame and off you go.
Flush Valve
The Pre-filter is equipped with a Flush Valve to clean your Pre-filter during operations. Protect your high pressure water equipment with the DERC Pre-filter. High capacity, little work and still easy to handle.
| Part number |
FL.15000 |
Max. working pressure
|
10 bar
|
| Capacity |
30 m3/h |
| Size |
550 x 260 x 600 mm |
| Connection |
Storz 65 cam 81 according to NEN 3374
|
| Weight |
25 kg |
| Inner filter element |
30/50/75/100/300/435 µm (FL12001.xxx)
|
| Outer filter element |
75/100/130/200/300/435/800 µm (FL12002.xxx) |
Like to know more about the DERC Pre-filter?
Contact DERC Salotech +31 (0)186 62 14 84.